HRT - MicroStreamer
Brand: HIGH RESOLUTION TECHNOLOGIES
This product can only be shipped to US addresses.
Category: Audio Equipment, Headphone Amps, Digital To Analog Converters, Computer Audio, USB Headphone Amps, USB DACS.
* All specified ship dates are estimates
HRT MicroStreamer USB DAC/Headphone Amp
Small enough to fit in the palm of your hand and light enough to carry in a shirt pocket, the HRT MicroSreamer was designed with portability in mind. The MicroStreamer is a USB connected and powered, ultra high-performance external sound card for computers, tablets, smart-phones or any compliant host. Dual purpose built, it incorporates both a high–performance headphone amplifier with an analog volume control that allows you to connect the MicroStreamer between your computer and headphones; and a fixed-level, low impedance 2.25V line output that allows you to connect between your computer and home stereo, other entertainment system or to powered loudspeakers.
"The HRT microStreamer has raised the bar so high in its category I hope it gets all the accolades it deserves. In uber-portable headphone amp/DAC combo solutions for the computer I can't think of another component outside the Audioquest Dragonfly, which to my ears doesn't have quite the dynamic punch of the microStreamer that even approaches the sonic performance of this miraculous little aluminum brick. It's like an audiophile’s reference-system-in-a-box. You have to hear it to believe it."
Housed in an aluminum enclosure precision-machined from solid billets, the durable and beautiful MicroStreamer is modern, sleek and compact. It is simple to use and provides a level of improvement in sound quality that must be heard to be believed. To improve your computer's sound quality, the MicroStreamer takes over the job of processing the digital music stream from the computer - a task critical for producing great sound. Don't be fooled by its modest cost or size: the MicroStreamer's ability to transform the sound of your computer, smart phone or tablet's music files or streaming audio into a state of the art musical experience will make a believer out of even the most critical listener.
As with other HRT products, the set up and operation of the MicroStreamer is super easy: simply use the included USB cable and hook the input of the MicroStreamer into any USB port on the host computer, smart phone or tablet and select it as the default outpost device. Now you are ready to experience your music with the best sound possible.
Operating jitter-free via the use of its high-performance asynchronous USB transceiver, the MicroStreamer, when plugged in, automatically performs an "electronic handshake" with the computer or other host and tells it that the MicroStreamer is to get all audio signals sent to it instead of the Digital-to-Analog converter (DAC) that is built into the computer, and that‘s it! To enjoy the music in your home entertainment system optimally, connect the MicroStreamer's fixed 1/8" output jack to any available line-level analog input on your integrated amplifier, preamp, receiver, or powered loudspeakers. Alternatively, connect your favorite headphones to MicroStreamer's variable output port.
Volume control of MicroStreamer's OCL (output capacitor-less) headphone amplifier is accomplished by using the digital ‘slide’ control on the host computer's music playback software to adjust microStreamers’s internal analog volume attenuator. This clever analogue attenuation arrangement allows the full audio quality of the microStreamer to remain pure, clean and full-ranged, avoiding the known sonic degradation of digital attenuators.
With its jitter-free asynchronous interface, combined with processing power that allows native-resolution (no up-sampling) playback of digital music data up to a maximum of 24-bit/96k material, the MicroStreamer will transform your computer, tablet, or Smartphone into a better-than-CD quality source. Utilizing native Audio Class 1.0 drivers (present in all modern PC, Mac & Linux computers) there are no extra drivers or software to install.
LED indicators on the side of the MicroStreamer's aluminum housing show the current sample rate (32k, 44k1, 48k, 88k2 & 96k), as well as the state of its built-in mute circuit; you will always know at a glance your systems operating mode. As with other HRT products, as firmware improvements become available, HRT's UpStream utility allows the MicroStreamer to be updated right from the computer's desktop in a matter of seconds.
The High Resolution Technologies MicroStreamer, along with all the other products in the HRT lineup, is designed and manufactured in California.
Full Scale Output: 2.25 V RMS (line), 1.4V (headphone)
Output Impedance: 50 Ohm (line), .5 Ohm (headphone)
Frequency Response (20 Hz/20 kHz): +0db / -.4dB
Output Power: up to 140 mW (headphone)
Noise Floor (DC to 30 kHz): 18 uV RMS
S/N Ratio (DC to 30 kHz): 102 dB
S/N Ratio (A-weighted): 105 dB
THD+N (1 kHz Full Scale): .002% (line), .008% (headphone)
THD+N (1 kHz -20dB): .0006% (line)
Jitter contribution (DC to 30 kHz): >130 dB below full scale
Attenuator range: line fixed, 63 steps (headphone)
Sample Rate: up to 96 kHz
Bit Depth: up to 24 bit
USB transfer protocol: asynchronous
Power Requirements (USB): 90 mA
Dimensions: 2.5" x 1.2" x 0.4"
At Music Direct, we offer our customers a 60-Day Money Back Guarantee on components, hardware and audio accessories. This allows you time to ensure you made the right choice. If you are not satisfied with your purchase, contact our customer service department or your audio consult directly to arrange for a return.
This guarantee is not applicable on all Fluids, Phono Cartridges, and some special order merchandise.
Music is only returnable if it has not been opened.
To view our full return policy, click here.
Contact us with any questions about this policy.
|Customers Who Purchased This Item Also Bought: