Exceptional Music Reproduction for the Most Discriminating Listener
The Marantz PM8004 is one of the finest integrated amplifiers ever designed for under $1000. The high-current amplifier section includes new HDAM-SA3 outputs for instant dynamics and a low noise floor. The signal paths in the preamp section are shorter for less signal loss and a “Source Direct” button takes this another step further by bypassing the tone control section. The excellent built-in phono stage will work with any turntable equipped with a moving magnet cartridge. There is even a new ‘TriTone’ special 3-band EQ for iPod playback to help improve the sound of MP3s. The Marantz PM8004 will make any music collection come to life.
The Marantz PM8004 Integrated Amplifier combines the power and
finesse that audiophiles demand with smart, timely features designed
for the way we listen to music today. The PM8004 is a great
platform for any system providing optimum listening solutions for
hi-rez, lo-rez and even analog sources. From turntables to iPods to SACD
players to surround systems, the PM8004 will make whatever music you listen on whatever format sound its best.
Features:
- 100W/ch (4 ohms), 70W(8 ohms) RMS Power (20Hz-20kHz)
- “Current Feedback” topology for power amp and volume amp
- Marantz HDAM®-SA3 circuit
- Shortest signal path, High Instantaneous Peak Current design
- New Tri Tone Control (Bass/Mid/Treble)
- “Constant Current Feedback” circuit for MM Phono Equalizer
- Marantz Custom Speaker Terminals
- Speaker A/B switching
- Double shielded Torroidal Power Transformer
- Triple Layered chassis
- 3 analog L/R Inputs, 2 recorder In/Out
- Power Amp Direct In for a use as a power amplifier
- Pre Out jacks
- Marantz D-Bus(RC-5) Remote In/Out
- Source Direct mode
- Detachable Power Cord (IEC320 2pin type)
Exceptional Music Reproduction for the Most Discriminating Listener
The Marantz PM8004 is one of the finest integrated amplifiers ever designed for under $1000. The high-current amplifier section includes new HDAM-SA3 outputs for instant dynamics and a low noise floor. The signal paths in the preamp section are shorter for less signal loss and a “Source Direct” button takes this another step further by bypassing the tone control section. The excellent built-in phono stage will work with any turntable equipped with a moving magnet cartridge. There is even a new ‘TriTone’ special 3-band EQ for iPod playback to help improve the sound of MP3s. The Marantz PM8004 will make any music collection come to life.
The Marantz PM8004 Integrated Amplifier combines the power and finesse that audiophiles demand with smart, timely features designed for the way we listen to music today. The PM8004 is a great platform for any system providing optimum listening solutions for hi-rez, lo-rez and even analog sources. From turntables to iPods to SACD players to surround systems, the PM8004 will make whatever music you listen on whatever format sound its best.
A Solid Foundation - Power Supply and Parts Selection
Specified by Marantz engineers, a large toroidal transformer is the foundation for the PM8004’s power supply. This highly efficient design greatly improves current delivery, especially during demanding passages. The circular shape and double shielding control stray magnetic fields which adversely affect sound quality.
The PM8004 also benefits from a wide array of parts carefully selected only after extensive laboratory evaluation and listening-room audition. This process, call Sound Tuning, assures optimal performance.
High Current Amplifier
The 70 watts per channel (8 ohms) amplifier section delivers high instantaneous current so musical peaks retain their full dynamic range. The PM8004’s mechanical and electrical aspects are designed to minimize the length of power supply lines and their potential interference. Individual power supply segments are located on the same heat sinks as the output transistors. The PM8004 responds instantly and crisply to musical transients which lesser amplifiers would simply blur.
Short Signal Paths for Clearer Sound
For critical listening, the PM8004 includes a “Source Direct” switch that bypasses balance and tone control circuits for pristine reproduction.
Audio Circuitry Designed for Superb Listening
Both preamp and power amp sections use fully-discrete, high speed current feedback circuits for minimal phase shift and better detail resolution. The built-in MM phono preamp is a fully discrete, constant-current design optimized for moving magnet phono cartridges.
Hyper Dynamic Amplifier Module
Marantz’s HDAM® SA3 is the most recent addition to the Hyper Dynamic Amplifier Module series, performing critical stage-to-stage signal transfers which leave the music unaffected. Most inputs benefit from a common buffer circuit which minimizes unwanted interactions between source and amp. The CD input enjoys a separate buffer for superb isolation. Even the Record Out terminals are buffered for enhanced clarity.
Beautiful Appearance, Functional Design
The PM8004’s front panel uses a carefully chosen combination of aluminum and glass-reinforced resin to create a distinctive three dimensional appearance. Indirect reflecting blue LEDs indicating input selection, etc., heighten that elegant appearance. Aluminum front panel knobs add solidity while the high precision motorized volume control responds instantly to both touch and the PM8004’s included remote control.
As a proper foundation for the PM8004’s feature-rich performance, the chassis itself includes a triple-layer bottom plate to ensuring long-term alignment and vibration control.
Attention to Detail
Other details, those affecting both connectivity and convenience, add to the PM8004’s appeal. Rear panel speaker connectors, for example, are Marantz-original heavy duty designs ideally suited for use with audiophile speaker cable. With A/B speaker connectors and a front panel switch, you can select speakers in two different locations. Other rear panel input and output terminals are gold-plated for long-term corrosion resistance and better conductivity.
Flexible Equalization
Notice the PM8004's front panel TriTone tone controls. Tri-Tone adds a midrange control to the more conventional bass and treble adjustments. Tri Tone actually dates back to Marantz’s 1954 Model 1 Preamplifier and is even more useful today to correct frequency imbalances that often characterize compressed music sources such as iPods.
Easily Integrates into Your Home Theater System
Power Amp Direct allows you integrate a dedicated 2 channel Hi-fi system with your home theater receiver and easily switch between modes. A convenient front panel switch optimizes the main-in terminals for use with a separate surround processor so you can enjoy the same Left and Right speakers you use for stereo. This switch also disables the PM8004’s front panel controls (input selection, volume, balance, etc.) so that the surround processor acts as the control center when you’re enjoying surround sound. Another three-second push on the Power Amp Direct button restores the PM8004 to normal stereo operation.
Features:
- 100W/ch (4 ohms), 70W(8 ohms) RMS Power (20Hz-20kHz)
- “Current Feedback” topology for power amp and volume amp
- Marantz HDAM®-SA3 circuit
- Shortest signal path, High Instantaneous Peak Current design
- New Tri Tone Control (Bass/Mid/Treble)
- “Constant Current Feedback” circuit for MM Phono Equalizer
- Marantz Custom Speaker Terminals
- Speaker A/B switching
- Double shielded Torroidal Power Transformer
- Triple Layered chassis
- 3 analog L/R Inputs, 2 recorder In/Out
- Power Amp Direct In for a use as a power amplifier
- Pre Out jacks
- Marantz D-Bus(RC-5) Remote In/Out
- Source Direct mode
- Detachable Power Cord (IEC320 2pin type)
Power output: 70 WPC @ 8Ω / 100 WPC @ 4Ω
THD: 0.02% (Both channels driven full bandwidth)
Frequency response: 5Hz – 100kHz (±3dB)
Input sensitivity / impedance
PHONO (MM): 2mV/47kΩ
CD, TUNER, AUX/DVD, RECORDER: 200mV/20kΩ
POWER AMP DIRECT IN 1.6V/15kΩ
Output voltage/Output impedance
PRE OUT 1.6V/600Ω
RIAA deviation (20Hz ~ 20kHz) ±0.5dB
S/N (IHF-A, 8Ω load)
PHONO (MM) 87dB (5mV input, 1W output)
CD, TUNER, AUX/DVD, RECORDER 106dB (2V input, Rated output)
POWER AMP DIRECT IN: 125dB (Rated output)
Tone controls
Bass (50Hz) ±10dB
Mid (900Hz) ±6dB
Treble (15kHz) ±10dB
Power requirement AC 120V 60Hz
MAX Power consumption: 200W
Standby power consumption 0.3W
Dimensions (HWD): 5.25"x17.38"x15"
Weight: 26.9 lbs
At Music Direct, we offer our customers a 30-Day Money Back Guarantee on components, hardware and audio accessories. This allows you time to ensure you made the right choice. If you are not satisfied with your purchase, contact our customer service department or your audio consult directly to arrange for a return.
This guarantee is not applicable on all Fluids, Phono Cartridges, and some special order merchandise.
Music is only returnable if it has not been opened.
To view our full return policy, click here.
Contact us with any questions about this policy.
|
 |
|
