JOLIDA - JD102CRC INTEGRATED TUBE AMP

The Jolida JD102CRC Offers Up 25 Watts of All-Tube Power

With a circuit design based on early 1960s American tube amplifiers, the Jolida 102CRC is a blast from the past. Small in stature, but not in performance, the JD102CRC has a big heart, delivering a surprising amount of juice even into difficult loads. With four inputs and both a 4Ohm and 8Ohm tap, the JD102B is quite flexible. We've used the JD102CRC on efficient tower speakers, inefficient bookshelf speakers and everything in between with great results. The elegant understated appearance works well with virtually any system and the small form factor makes the JD102CRC a great alternative to solid state or digital mini amps. Besides, the golden glow of those seven tubes will warm your heart, but not your room!

Real Tube Power
Check out these specs: 20WPC with a frequency response of 7Hz-95kHz. This solidly built 22-pound amp has surprisingly good power delivery, due in large part to the custom-wound Jolida transformers, now on their 15th generation! The JD102CRC uses two pairs of EL84 power tubes with a dual-triode 12AX7 preamp tube and a pair of 12AT7 driver tubes.

By any measure, the Jolida 102CRC is a great little tube amp. Compact and elegant, if you are hungering for the golden warmth you can only get from tubes, the 102CRC is really impressive.

Features:
• Fully Integrated Stereo Amplifier: Input 600mV driving 20 watts, maximum 25 watts output
• Four Analog Inputs With Chassis Mount Gold-Plated RCAs
• Right and Left Stereo Balance Control with ±20dB Range
• Custom Wound Audio Transformers with a core of German grain oriented silicon steel
• Gold-Plated Binding Posts With Both 4 ohm & 8 ohm taps
• Top Panel Bias Testing Terminals with Bias Adjustment Controls.
• Blue Alps potentiometer, High-Resolution Caps & Resistors

Maximum power Output: 25 WPC @ 8 ohms (1KHz)
Rated Power Output: 20 WPC @ 8 ohms (26Hz to 50KHz)
Frequency Response: 7Hz to 95KHz + 1dB; 0dB at 1KHz
Bandwidth: 14Hz to 80KHz + 3dB; 0dB = 20 W 1KHz @ 8 ohms
Distortion THD + N: Less than 1% at 20W output, 39Hz to 10KHz, 8 ohms
Circuit Type: Ultra Linear, Class AB1
Input Impedance: ≤ 250Kohms
Input Sensitivity: Max. 600mV for 20 watt output at 1KHz
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less than 7 dB
Signal & Noise Ratio S/N: 70dB below rated output from 10Hz to 200Khz
Tube Complement:
   Qty 4 EL84 (2x Matched Pair)
   Qty 1 12AX7A Pre-amp
   Qty 2 12AT7 driver tubes
Power Requirements: 110V-120 VAC 60Hz
Power Consumption: 90 watts standby, 200 watts maximum
Dimensions (HWD): 5"x12x8
Weight: 18 pounds
Warranty: One year limited parts and labor

At Music Direct, we offer our customers a 30-Day Money Back Guarantee on components, hardware and audio accessories. This allows you time to ensure you made the right choice. If you are not satisfied with your purchase, contact our customer service department or your audio consult directly to arrange for a return.
 
This guarantee is not applicable on all Fluids, Phono Cartridges, and some special order merchandise.
 
Music is only returnable if it has not been opened.

To view our full return policy, click here.
Contact us with any questions about this policy.