BAT - VK-D5 CD PLAYER W - REMOTE (24 Bit)
BAT/VK-D5 24-Bit CD PLAYER W/REMOTE
We’ve said it before, but here it is again. A CD player is only as good as its analog output stage! The VK-D5's design follows the BAT purist approach of using zero negative feedback to achieve the desired goals of wide bandwidth and circuit linearity. No buffers, followers or op-amps are used anywhere in the signal path. Unlike the more typical cathode follower output stage found in many so-called vacuum tube CD players, the VK-D5 features a high-current output stage using six tubes (6922’s) in a plate-loaded configuration. The VK-D5's Unistage® design delivers up to ten times as much current as the simple buffered output found in competing designs.
The VK-D5 is a fully balanced design in both the digital and analog domains. The digital section features four Burr-Brown PCM-1704 DACs arrayed in a true dual-differential configuration. The output from each DAC is delivered to a unique current-to-voltage converter that achieves outstanding performance by using the highest quality Vishay bulk foil resistors in a differential passive Flying I-V circuit. The resulting signal is then amplified by a massive high-current vacuum-tube balanced output stage. This innovative approach culminates in a new standard for CD performance and a new balance of power in digital design.
The VK-D5's simple and elegant engineering approach is without peer. A proprietary servo-board synchronizes the Phillips transport mechanism to a single master clock while the VK-D5's single-box design eliminates interface induced jitter. The BAT designed reconstruction filter uses a fully differential linear phase topology to preserve the integrity of the original signal. Complete differential signal processing is accomplished with just four circuit blocks whereas more conventional designs would require up to twelve. Throughout, the VK-D5 is engineered without compromise.
One picture is worth a thousand words, one listen a dozen reviews. Try the VK-D5 in your home and hear digital reproduction without glare or harshness. BAT makes music…Pure and Simple!
VK-D5 Specifications: (This unit is only available in the Black on Black finish shown above) |
| |
| Analog outputs: | 1 XLR and 1 RCA |
| Digital output: | BNC 75 O |
| Output voltage: | 2.5 V (each phase) |
| Signal to noise ratio: | 100 dB |
| Frequency response: | 20 Hz to 20 kHz ±0.5 dB |
| Absolute polarity: | Selectable via remote or front panel |
| Tube complement: | Six 6922 |
| Power consumption: | 150 VA maximum |
| VK-R2 remote (standard) | Provides complete CD player control, plus volume, fade, and mute functions for the remote control-equipped BAT preamplifiers. |
| | |
| Dimensions (W x H x D): | 19' x 5.75' x 15.5' |
| | |
| Weight-unpackaged: | 30 lbs (14 kg) |