High-Value Vibration Control, Premium German Engineering, Screw-On Installation: Finite Elemente Ceraball Isolation Feet Work Wonders with Components, Speakers, and Equipment Racks
The most affordable and highest-value entry in Finite Elemente's Cera Series, German-made Ceraball Isolation Feet offer easy screw-on installation and make for a serious upgrade when used under components, loudspeakers, and equipment racks. Ceraball supports up to 660 pounds when used in a set of four, features height adjustability of up to 10mm, and offers a useable height of 30mm. Using direct coupling to effectively transfer sound-interfering resonances via ultra-hard ceramic balls, stainless-steel construction, and exacting engineering, Finite Elemente's Cera technology strikes an optimal balance between damping and deflection. The resulting vacuum effect cancels unwanted vibrations exactly where they begin – avoiding any resonance buildup, overdamping, or deflection loss. The result: Incredible improvements in low-level resolution, focus, transparency, harmonics, separation, and dimensionality. 100% Music Direct Guaranteed.
"The Ceraball, Cerapuc, and Cerabase equipment feet are another story. They made components sound a lot better. They are expensive, but excellent values in terms of improvement per dollar. Fully equipping my reference system cost about $2200, but the improvement – to about $100,000 worth of gear – was HUGE! And after I'd heard my system with the [Finite Elemente] feet in place, there was no going back!"
– Brian Damkroger, Stereophile
"The Ceraproducts bring out the best in a system, especially in terms of absolute detail. This is something of a 'Mission Accomplished' for many audiophiles, as anything that can make good audio sound more detailed and therefore bring more of the music to the fore has to be a good thing by definition. And here, it is a good thing."
– Alan Sircom, Hi-Fi+
"When [he] played a track and took away the three Ceraballs from under the Quad amplifier, the system sounded flat and lifeless. When he put them back, back came the magic. Crazy, right? But I heard what I heard!"
– John Atkinson, Stereophile
About Cera Technology
Cera technology is based on direct coupling for effective transfer of sound-interfering resonances. Fast resonance transfer is provided by ultra-hardened high-tech ceramic balls. When combined with precision-machined stainless steel, the optimum balance between damping and deflection is achieved. The resulting vacuum effect draws off unwanted resonance directly where it evolves. The clear advantage: No resonance buildup, no overdamping, no loss of deflection.
Usable height: 1.2"
Dimensions: Ø 1.4" (top section), Ø 2.2" (bottom section)
Load capacity: 661 lbs. (set of 4), 496 lbs. (set of 3)