Everything a Compact, Modern Amplifier Should Be (and How It Should Sound) for a Modest Price: NAD D 3045 Hybrid Digital Amp Features High-Res USB DAC, Phono Preamplifier, aptX HD, and More
Get the audio quality you want – and what you need – for a spectacularly modest cost with the 60Wpc NAD D 3045 hybrid digital amplifier. Packed with today's requisite features, including high-resolution DSD and MQA support plus inputs for vinyl and CD playback, D 3045 arrives with an asynchronous USB DAC for seamless computer-audio operation and interfacing with programs such as Room and JRiver. A built-in precision clock drastically reduces jitter for higher-fidelity sound. You also have the convenience of streaming in aptX HD Bluetooth – even to your Bluetooth headphones. And worry not. D 3045 has an onboard, low-impedance headphone amplifier to take care of any ‘phones you may have and deliver your music with tremendous clarity and punch.
On the traditional spectrum, D 3045 boasts analog and digital inputs for CD spinning, connectivity for your TV, an HDMI ARC input for control via your TV remote, and a moving-magnet phono preamplifier for LP playback. Have a subwoofer? It's covered, too. NAD also tosses in a remote control. All together, D 3045 gives you energy efficiency, powerful amplification, silent operation, cutting-edge technology, and stellar flexibility in a compact unit that fits anywhere. You could spend much, much more gathering a separate amplifier, headphone amplifier, USB DAC, and phono preamplifier. The choice is yours. But at this price point and feature set, you won't do any better. 100% Music Direct Guaranteed.
- 2 x 60W Hybrid Digital Amplifier
- Two-Way Bluetooth powered by Qualcomm aptX HD audio
- Asynchronous USB 24/192 Input supporting MQA and DSD
- HDMI Audio Return Channel
- Coax and Optical Input
- MM Phono and Line Input
- Preamp Out
- Sub Out
- Headphone Amp
- IR Remote
THD (20Hz – 20kHz): <0.003% at 2V out
Signal-to-Noise Ratio: >100dB (IHF, A-weighted, ref. 500mV out, unity gain)
Channel separation:
>85dB (1kHz)
>80dB (10kHz)
Input impedance (R and C): 47kohms + 220pF
Maximum input signal: >5.5Vrms (ref. 0.1% THD)
Output impedance: 400 Ohms
Input sensitivity: 82mV (ref. 500mV out, Volume maximum)
Frequency response: ±0.2dB (20Hz - 20kHz)
Maximum voltage output - IHF load: >4V (ref. 0.1% THD)
Phono input/Pre out:
THD (20Hz – 20kHz): <0.015% at 2V out
Signal-to-Noise Ratio:
>82dB (200 Ohm source, A-weighted, ref. 500mV out)
>76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)
Input sensitivity: 1.35mV (ref. 500mV out, Volume maximum)
Maximum input signal at 1kHz: >90mVrms (ref. 0.1% THD)
Frequency response: ±0.3dB (20Hz - 20kHz)
Line in/Headphone out:
THD (20Hz – 20kHz): <0.003% at 120mW
Signal-to-Noise Ratio: >90dB (32 Ohm load; A-weighted, ref. 500mV out, unity gain)
Frequency response: ±0.3dB (20Hz - 20kHz)
Output impedance: 2 Ohms
Maximum headphone output, 32 Ohm load: <8V (ref. 0.1% THD)
Continuous output power into 4 and 8 Ohms: 60W (ref. 20Hz-20kHz at 0.03% THD, both channels driven)
THD (20Hz – 20kHz): <0.005% (at 1W, 4 and 8 ohms)
Signal-to-Noise Ratio: >98dB (A-weighted, 500mV input, ref. 2.828V out in 4 Ohms)
Clipping power: >80W (at 1kHz 4 Ohms 0.1% THD)
IHF dynamic power:
8 Ohms: 80W
4 Ohms: 150W
2 Ohms: 200W
Peak output current: >18A (in 1 Ohm, 1ms)
Damping factor: >300 (ref. 8 Ohms, 20Hz to 6.5kHz)
Frequency response: ±0.3dB (20Hz - 20kHz)
Channel separation:
>75dB (1kHz)
>70dB (10kHz)
Input sensitivity: 260mV (for 30W in 4 Ohms)
Supports bit rate/sample rate:
up to 24 bit/192kHz (digital source)
up to 24 bit/384kHz (computer source)
Standby power: <0.5W
Dimensions (WHD): 2 13/16" x 9 5/16" x 10 7/16"
Weight: 7.9 lbs.
Warranty: 2 years
User Manual (PDF, 2.6 MB)