Parasound - NewClassic 275 v.2 Two Channel Power Amplifier

Equipment Amplification Power Amp
Price $899.00
Adding to cart… The item has been added
Availability: In Stock
This item is in stock and ready to ship. Depending on the time of day when you place your order, it will ship same day or next business day.
SKU:
APARANC275V2

Also Available:

California customers: Please click here for
your Proposition 65 warning.
Parasound - NewClassic 275 v.2 Two Channel Power Amplifier

Parasound - NewClassic 275 v.2 Two Channel Power Amplifier

Price $899.00
Availability:
Adding to cart… The item has been added
Customers Also Viewed
Description

Cool Operation, High Efficiency, and Compact Footprint Make Parasound NewClassic 275 v.2 Ideal for Small Spaces and Custom-Install Setups: Power Amplifier Packs a Punch

You might not think a 2.5-inch-tall power amplifier can pack much of a punch, but the Parasound NewClassic 275 v.2 is not your ordinary high-end component. Ideal for rooms and environments that need cool-running operation and high efficiency, the 20-pound mighty mite outputs a clean, conservatively rated 90Wpc into eight ohms – and 200Wpc in bridged mode. Providing 30 amps of peak current per channel, NewClassic 275 v.2 offers two-ohm stable operation with a load selector switch. In addition to its space-conscious 2.5 x 17.25 x 16 inch (HWD) chassis, it boasts the audiophile technology and engineering for which Parasound is renowned.

Anchored by fully discrete circuitry and a high-current toroidal transformer, the 20-pound dynamo serves both two-channel and home-theater setups with equivalent aptitude. DC servo and relay protection circuits, a switchable high-pass filter, rear-mounted left and right gain controls, and a suite of standby, status, and high-temp indicators give you convenient options and peace of mind. The rack-mountable NewClassic 275 v.2 also allows for auto turn-on/off via DC trigger or audio signal (with two sensitivity settings). A rear-mounted lockout switch disables the front A/B buttons for custom-install use, while heavy-duty, gold-plated five-way speaker terminals ensure compatibility with practically any speaker connections.

An incredible value, the quiet-operating NewClassic 275 v.2 reproduces music with absorbing clarity, detail, dynamics, and presence. Few power amplifiers with its ergonomics, capability, build quality, and reliability reside at its end of the price spectrum. Parasound's two-year warranty and our 100% Music Direct Satisfaction Guarantee see to it you have every reason to audition NewClassic 275 v.2 in your home today.

Power Output (RMS power, 20 Hz-20 kHz), All Channels Driven:
   90 watts x 2, 8Ω
   150 watts x 2, 4Ω
   150 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono:
   200 watts x 1, 8Ω
   200 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity: 20 amps peak per channel
Frequency Response: 20 Hz: 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom: 1.3 dB
Total Harmonic Distortion:
   0.35% at full rated output
   0.025% at average listening levels
IM Distortion: 0.05 %
Transient IM Distortion: Not measurable
S/N Ratio:
   110 dB at rated output, IHF A-weighted
   103 dB at rated output, unweighted
   93 dB at 2.828 V output, IHF A-weighted
   84 dB at 2.828 V output, unweighted
Input Impedance: 33 k Ω
Input Sensitivity: 800 mV for full rated output (28dB)
Inter-Channel Crosstalk: 80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
Damping Factor: Over 150 at 20Hz
12V Trigger Turn On: DC 9-12V, 15 mA
Audio Turn On:
   Quieter: 1 mV
   Louder: 6 mV
AC Power Requirement:
   110: 120 V / 220 -240 V, 50-60 Hz
   0.5 watts standby
   25 watts Idle (no audio)
   350 watts full output
Dimensions (WDH): 17-1/4" x 16" x 2-1/2"
Weight: 20 lbs.

User Manual (PDF, 562 KB)

Customers Also Bought