Shunyata - Delta v2 Phono (RCA, 1.5m) **OPEN BOX**

Equipment Cable
Now $1,399.00
Was $1,930.00
Save $531.00 (28%)
Condition: Open Box
Availability: In Stock
This item is in stock and ready to ship. Depending on the time of day when you place your order, it will ship same day or next business day.
California customers: Please click here for
your Proposition 65 warning.
Shunyata - Delta v2 Phono (RCA, 1.5m) **OPEN BOX**

Shunyata - Delta v2 Phono (RCA, 1.5m) **OPEN BOX**

Now $1,399.00
Was $1,930.00
Save $531.00 (28%)
Customers Also Viewed

Give Your Turntable the Connection It Deserves: Shunyata Delta v2 Phono Interconnects Sound Great Out of the Box, Significantly Elevate Harmonic Depth and Resolution

Take no shortcuts linking your turntable to your phono preamplifier and get the high-fidelity purity you deserve with the Shunyata Delta v2 phono interconnects. Continuing the company's relentless quest to find and implement cutting-edge, science-based technology in the name of great audio, Delta v2 benefits from Shunyata's Kinetic Phase Inversion Process (KPIP) – a groundbreaking conditioning process that not only eliminates the need for time-consuming burn-in on your end but elevates the overall fidelity of your system. Ohno continuous-cast copper hollow-core VTX conductors, advanced fluorocarbon dielectrics, and sonic welding that mitigates junction points further factor into the premium build. A separate grounding cable also comes standard. You will experience finer resolution, more harmonic depth, and added dynamic subtlety when listening to music with Delta v2 in your analog setup. And you won't have to wait hours and hours for it to happen. 100% Music Direct Guaranteed.

ZiTRON Technology
The insulation that protects wire can create a ghost-like signal that subtly burrs the source audio signal. The scientific term for this is: dielectric absorption and re-radiation. ZiTRON is a technology developed by Shunyata Research that prevents this type of signal cable micro-distortion. It requires a special type of conductor that has two signal paths. An electric-field compensation circuit creates a contra-signal that prevents the insulation from developing a charge. ZiTRON cables preserve the integrity of the source signal even when using very long cable runs are required.

ArNi Wire
ArNi wire was created by Shunyata Research designed to be the finest quality wire available. It begins with the highest purity of copper available – OFE C101, SPC or Ohno (single crystal). Fluorocarbon dielectrics, usually only found in in the aerospace applications have special electrical characteristics including extremely low dielectric absorption, high dielectric strength and exceptional heat resistance. When used in digital wiring it significantly reduces transient energy storage and release which affects phase noise performance.

VTX Conductors
Shunyata Research's exclusive VTX conductors have virtual tube geometry. The core of the conductor is completely hollow minimizing skin effects and random eddy currents. They are produced using OFE Alloy C0101 - the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS.

Ohno Wire
Ohno wire, also called PCOCC was invented in 1986 by professor Atsumi Ohno of the Chiba Institute of Technology in Japan. Copper wire is created by an extrusion process that pulls a rod of cold copper through a small orifice which creates multiple crystalline boundaries. By contrast, Ohno wire is made by a process using heated molds that cast a wire to form a single crystalline structure. Ohno wire is well known for its exceptionally pure, grain-free sonic qualities.

Phono Ground Wire
Just as the quality of the phono signal cable can affect turntable performance, so to can the phono ground wire. The phono cable ground wire should not be an after thought. It should be complete separate from the phono signal cable, not bonded to it. This isolates the ground wire from any captive reactance to the signal wires. Shunyata Research phono ground wires are made with VTX and VTX-Ag depending upon the model and are made from our exclusive ArNi conductors.

Kinetic Phase Inversion Processing was developed by Caelin Gabriel after years of research into the underlying causes of various effects such as burn-in, wire directionality and the effects of cryogenic treatment. He discovered that there was an underlying core principle that burn-in and cryogenics only partially addressed. Once the governing principle was understood it became possible to create a processor that reduces the need for long burn-in periods and eliminates the effects of cryogenic treatment. Four-days of continuous KPIP processing dramatically reduces the sonic ups and downs associated with burn-in, delivering a relaxed and natural presentation.

Customers Also Bought