Engineered for Turntables and Low-Current Front-End Components: IsoTek EVO3 Nova One Power Conditioner Delivers High-Frequency Filtering, Removes Noise, Provides Protection
Designed for use with single front-end, lower-current components like turntables and preamplifiers, the single-outlet IsoTek EVO3 Nova One power conditioner supplies high-frequency filtering and features a nine-section circuit that removes both common mode and differential mode mains noise. In EVO3 Nova One, the middle sections of the filter employ IsoTek's unique adaptive gating circuits that auto-sense the requirements of the connected load – providing the ideal component-specific filter level. A unique earth filtering circuit further enhances the results, as does the presence of solid-core silver-plated PCOCCC internal wiring for supreme conductivity.
Affording 2300W of clean power and more than 100,000A (1840 joules) of instantaneous production, harnessing IsoTek's unique sequential system that comes on as needed to avoid dynamic compression or restrictions, EVO3 Nova One will increase the life of your component and protect it against dangerous power surges and voltage spikes. You can also link the 22-pound unit with other IsoTek devices (such as Genesis One and Titan One) for a full system upgrade that requires just one power cable. Extremely convenient, its compact footprint – 4.9 x 3.0 x 18.5 inches (HWD) – also means EVO3 Nova One can be placed side-by-side with five other units on an equipment rack.
The inclusion of IsoTek's Premier C19 power cable and our 100% Music Direct Satisfaction Guarantee round out this single-component dream machine.
"[Adding] the Nova One opened up the sound and improved the timing, increasing definition of leading edges, which resulted in greater drama and an obvious cleaning up of the high frequencies."
—Jason Kennedy, Hi-Fi+
"This (EVO3 Nova One) is potentially a very sound upgrade indeed as it provides a straightforward way of extracting higher performance from these traditionally tricky to upgrade devices. This is another extremely talented and well-realized (IsoTek) device that should work well in a variety of different situations."
"A very sophisticated product for very high-level systems, which is one of the most relevant improvements that can be incorporated into them once a combination is fine-tuned."
- Removes both Common Mode and Differential Mode mains noise.
- Dedicated single outlet delivers totally clean low distortion mains power.
- A nine section circuit consisting of both series and parallel filters dramatically removes Common Mode and Differential Mode power line noise
- Internal wiring; solid core silver plated PCOCC with FEP virtually an air dielectric.
- 2300W of clean power suitable only for all front-end components due to adaptive circuit.
Mains inlet: 10A IEC C19
Mains voltage: 100 to 240V
Mains frequency: 50 to 60Hz
Dimensions (WHD): 3.0" x 4.9" x 18.5"
Weight: 22.0 lbs.