Thrilling Speed, Impact, Musicality, Harmonics, and Bass: Revel Performa3 B112v2 Powered Subwoofer Features 12-Inch Driver, 1000-Watt Amplifier, and Parametric EQ
The Revel Performa3 B112v2 provides thrilling levels of speed, impact, musicality, harmonics, and, yes, bass. Tailored for pairing with other Revel speakers in a dedicated music and/or surround system, B112v2 utilizes a large 12-inch coated paper/pulp cone driver with a 50mm two-layer copper voice coil wound on a heat-tolerant fiberglass former, 19.2-pound Klippel-optimized magnet assembly, and vented die-cast aluminum frame. The presence of a 1000-watt amplifier, balanced XLR inputs, and onboard parametric EQ for easy real-time adjustments add to this inspired design's prolific abilities.
Visually, the 64.8-pound component touts Revel's signature luxury looks. Its cabinet arrives formed with contiguous wood layers to prevent splitting. In addition, strategically oriented internal bracing virtually eliminates unwanted cabinet vibration and coloration. And, like all Revel loudspeakers, B112v2 undergoes double-blind, position-independent competitive tests during development via psychoacoustic processes to confirm optimal sonics. Place this 18.44 x 15.94 x 16.56-inch (HWD) in your room today to hear for yourself with security backed by our 100% Music Direct Satisfaction Guarantee.
More About B112v2
At the heart of the B112v2's engineering is a new and improved woofer with 82% more linear excursion than the preceding B112. The transducer's 19.2-pound Klippel-optimized magnet assembly features a double-stacked ceramic 5 magnet with a flared vent for improved airflow. As a result, turbulence is reduced, output increased, and distortion minimized. Additional cooling vents in the back plate increase power handling while reducing compression. The cast aluminum frame is fully vented to minimize acoustic losses from excessive back pressure. A 50mm two-layer copper voice coil wound on a high heat-tolerant fiberglass former gives the transducer significant range of travel.
Driver Components: Coated paper/pulp cone with 50mm two-layer copper voice coil, vented ceramic 5 magnet assembly and vented die-cast aluminum frame
Amplifier Power: 1000 Watts RMS
Crossover Frequencies: 50Hz - 150Hz low-pass filter with LFE bypass
Low Frequency Extension (normal mode): 24Hz (-10dB); 27Hz (-6dB); 29.5Hz (-3dB)
Low Frequency Extension (extended mode): 23Hz (-10dB); 26Hz (-6dB); 29Hz (-3dB)
Input Sensitivity: 400mV (full power)/20k Ohms (balanced); 14k Ohms (unbalanced)
Enclosure Type: Sealed
Inputs: Balanced (XLR), unbalanced (RCA)
Dimensions (HWD): 18.44" x 15.94" x 16.56"
Weight: 64.8 lbs.