TEAC - TN-3BSE Manual Belt-Drive Turntable

Equipment Turntables
Now $399.00
Was $529.99
Save $130.99 (25%)
Adding to cart… The item has been added
Availability: In Stock
This item is in stock and ready to ship. Depending on the time of day when you place your order, it will ship same day or next business day.
SKU:
ATEACTN3BSEB

Also Available:

California customers: Please click here for
your Proposition 65 warning.
TEAC - TN-3BSE Manual Belt-Drive Turntable

TEAC - TN-3BSE Manual Belt-Drive Turntable

Now $399.00
Was $529.99
Save $130.99 (25%)
Availability:
Adding to cart… The item has been added
Customers Also Viewed
Description

The TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier. It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by Audio-Technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.

The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.

Highlights
  • Belt-drive mechanism
  • 2-speed turntable supporting 33-⅓ and 45 rpm
  • Knife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAEC
  • Aluminum die-cast platter
  • Built-in PHONO EQ amplifier compatible with MM-type cartridges
  • Hi-fi grade op-amp, NJM8080, used in PHONO EQ stage
  • Anti-skating mechanism
  • PHONO/LINE analog output (switchable)
  • Gold-plated oxidation-resistant output connectors
  • Pre-installed AT-VM95E cartridge supplied by Audio-Technica
  • Rigid, high-density MDF plinth with multi-layered lacquer finish
  • Shock-absorbing insulating feet
  • GND terminal
  • RoHS compliant
Read More

Type: Belt-drive (External drive)
Motor: DC Motor
Rotation Speeds: 33-1/3 rpm, 45 rpm
Wow-and-Flutters: 0.1% or less
S/N Ratio: 67dB (A-weighted, 20kHz LPF)
Turntable (Platter):
   Material: Aluminum Die-cast
   Diameter: 30cm
Tonearm Type: S-shape, Static-balanced
Effective Length: 223mm
Needle Pressure Range: 0g to 5.0g
Compatible Cartridge Weight:
   3.0g to 12.0g
   14g to 23g (including Head-shell)
Cartridge Type: MM-type
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Needle Pressure: 1.8 to 2.2g (2.0g recommended)
Weight: 6.1g
Headshell weight: 11g (including screws, nuts, and wires)
Compatible Stylus: AT-VMN95E
Average stylus life: approx. 300 hours.
Connector: RCA Pin jack x 1 pair (Gold-plated)
Output Voltage:
   PHONO: 4.0mV (1kHz)
   LINE: 224mV ( – 13dBV)
Operating Power: AC 100 to 240V, 50/60Hz
Power Consumption: 1.5W
Standby Power: 0.5W
Dimensions (WHD): 16.5" x 4.6" x 14.0"
Weight: 11.0 lbs.
Included Accessories: Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges x 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner's Manual (including Warranty Card)

User Manual (PDF, 879 KB)

Customers Also Bought