FREE SHIPPING On Orders Over $49*
Equipment > Phono Cartridges > Lyra - Etna SL MC Phono Cartridge
Click to Enlarge

LYRA - Etna SL MC Phono Cartridge

Phono Cartridges

23Reward Points
Add to Cart
Availability: In Stock (1)

Lyra Etna SL MC Phono Cartridge

Super-Low-Output Lyra Etna SL MC Phono Cartridge Plays With Extreme Detail, Removes Resonance, Produces Pristine Tones: Requires High-Gain Phono Preamplifier or Step-Up Transformer

Hands-down one of the most superb- and lifelike-sounding phono cartridges ever made, the Lyra Etna MC SL phono cartridge uses unique engineering to remove resonance. Not reduce it. Remove it completely. Yes, it's a big step up in price from most cartridges, but one that yields gains in transparency, the removal of distortion, and remarkable accuracy. In short, the advanced design principles allow the focus to be placed on the music buried in the grooves of your records. Etna SL is simply a work of art. A prestigious musical instrument. And an MC cartridge deserving of the "ultimate" moniker.

Extra Purity and Deeper Details: The Differences Between Lyra Etna and Etna SL
Available only by special order, Etna SL is a super-low output (0.2mV) version of Etna featuring a single-layer winding that reduces by half the moving mass, netting increased detail and enhanced resolution. Due to the reduced output, Etna SL requires a high-gain phono preamplifier capable of 64dB of gain or a step-up transformer designed for cartridges of 2-3 ohms or less. While Etna SL is definitely not for all users, those with the proper components will experience the added benefits of extra purity, more pristine tones, and deeper details.

"The [Lyra] Etna is one of the new breed of harmonically enriched, full-bodied, yet ultra-detailed and natural-sounding cartridges. The Etna rode silently in the groove, effectively rejecting any defects that normally produce impulse or constant noise. One of the most neutral yet enticing-sounding cartridges I've ever heard, it's also one I can recommend for any system and for any musical taste!"
– Michael Fremer, Stereophile

Constrained-Layer Construction Yields Sonic Freedom
Etna SL features a center structure made of solid titanium, but unlike Lyra Atlas, its central core is surrounded by an outer body machined from highly polished aircraft-grade aluminum and anodized with a brilliant black finish. The two pieces are press-fitted with resonance control rods and stainless steel screw bushings in a multi-material approach that touts significantly improved rigidity and damping characteristics. The prime advantage of such constrained-layer construction: No single material's sonic signature defines the sound of the cartridge.

Asymmetric Design, X-Shaped Coil Formers for Elite Tracking and Separation
Etna SL touts an asymmetric design that employs an offset yoke. By offsetting the front magnet carrier so that it is not in line with the cantilever assembly, a direct path gets established between the cantilever assembly and the tonearm's headshell. Vibrations are quickly drained away once converted to electrical signals, effectively suppressing any induced resonances that would otherwise manifest as sonic coloration. Etna SL also retains the X-shaped coil formers from Atlas. Compared to traditional square coil formers, the X-shape allows each channel to operate with greater autonomy, increasing tracking consistency and channel matching while also improving channel separation due to the decrease in crosstalk. Lyra's "New Angle" technology pre-biases the signal coils so they are perfectly aligned to the front and rear magnets during LP playback, which allows the coils to move optimally in all directions for distortion-free performance.

Read More Less
Type: Medium weight, medium compliance, low-impedance, low-output moving coil cartridge
Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted
Cantilever system: Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system
Coils: 2-layer deep, 6 N high-purity copper, chemically-purified high purity iron X-shaped former, 1.52 ohm self-impedance, 1.9μH inductance
Output voltage: 0.25 [email protected] cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range: 10 Hz-50 kHz
Channel separation: 35 dB or better at 1 kHz
Compliance: Approx. 12 X10 cm/dyne at 100 Hz
Vertical tracking angle: 20 degrees
Cartridge body: Multi-material (titanium, duralumin, bronze, stainless steel) self-clamping construction with reduced-surface higher-pressure headshell contact area, predominately non-parallel shaping, phase-interference resonance-controlling mechanisms, body threaded for mounting screws
Cartridge mounting screws: 2.6 mm 0.45 pitch JIS standard
Distance from mounting holes to stylus tip: 9.52mm
Cartridge weight (without stylus cover): 9.2g
Recommended tracking force: 1.65 ~ 1.78g (1.72g recommended)
Recommended load directly into MC phono input: Determine by listening,
Recommended load via step-up transformer: Use a step-up transformer designed for 2 - 3 ohms cartridge impedance. The transformer output must be connected to standard 47kohm MM-level RIAA input, preferably via short, low-capacitance cable
Recommended tonearms: High-quality pivoted or linear tangential tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA

Reviews (0)

You must logged in to ask a question, vote on a question, or answer a question. Click here to login.

Stay up-to-date on the latest and greatest in high-end audio


Check out the newest Music Direct catalogs

Learn More
Copyright © MusicDirect.com 2016. All Rights Reserved.