The Creek Sequel mk3 phono board is designed to match a wide-range of MM and MC cartridges, and can be fitted to the latest Creek integrated amps, the Evolution 50A and Evolution 100A. It can also be fitted to older Creek amps. The module must be fitted inside the amp in a slot that will change the Auxiliary Line input into a Phono input. The new-generation Sequel mk3 circuitry has been developed to simplify the user experience and provide flexibility to match various types of cartridge in one module. Not only can it be switched for 40dB or 50dB gain, the user can select 100pF or 200pF input capacitance and IEC low frequency roll-off, with a simple piano key switch on the PCB. The Evolution amp's display will automatically show Phono when the amp is fitted with the plug-in module and selected for that input. Exact matching of cartridge gain is not necessary as the amplifier's preamp volume control can always be used to increase or decrease the sensitivity.
Sequel Phono modules can also be used to enable vinyl input on current and older Creek amplifiers, including: Destiny 2 integrated amplifier, Evolution 2 integrated amplifier, Evolution 5350 integrated amplifier, Classic 5350SE Integrated amp, 5350SE, 5350R and 5350 Integrated amps, 5250, 5250R and 5250SE integrated amps, 4330 and 4330SE Integrated amps, but not mk2 versions, 4240 and 4240SE Integrated amps.