High-Quality Analog Playback, Plug-and-Play Effortlessness: TEAC TN-400S Turntable Includes Pre-Mounted Cartridge, Built-In Phono Preamp, S-Shaped Tonearm, Subsonic Filter, and A2D Converter
Making high-quality analog playback as effortless as turning on a faucet, the three-speed belt-drive TEAC TN-400S turntable arrives with an aluminum die-cast platter, low-friction spindle, and S-shaped tonearm. With the areas of speed stability and tracking covered, it then adds a pre-mounted audio-technica MM cartridge, built-in MM phono preamplifier with subsonic filter, and USB digital output for computer-based archiving to address convenience and flexibility. Most importantly, TN-400S sounds even better than it looks. High-grade internal components and easy usability round out an entry-level, plug-and-play 'table that will have you asking why you didn't start spinning LPs before now. 100% Money-Back Guaranteed.
Aluminum Die-Cast Platter Features Three-Speed Drive, Stable Playback
TN-400S' die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-1/3, 45, and 78RPM speeds. In addition, a precisely machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.
Built-In Phono EQ Amplifier Gives You Immense Flexibility
An onboard Phono EQ amplifier supports MM cartridges, allowing TN-400S to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip that amplifies the tiny audio signal from the stylus with the minimum of distortion.
Subsonic Filter and A2D Converter Add to Arsenal
By filtering out the frequencies below 18Hz, TN-400S prevents excess low-frequency signal levels being sent to amplifiers, presenting an easier electrical load to any connected speakers. This filter is particularly effective when playing back warped vinyl records which would otherwise induce undesirable woofer movement. TN-400S also incorporates an A/D Converter that delivers a 16-bit/48kHz digital audio signal via a rear-mounted USB port. This allows records to be digital archived on a PC. Once converted, users can then easily transfer the recordings onto devices such as smartphones and car CD players.
S-Shaped Static-Balanced Tonearm for Pure Playback
TN-400S' S-shaped, static-balanced aluminum tonearm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure. The tonearm lifter is fitted for smooth lowering of the tonearm onto records. Plus, the tonearm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tonearm and the headshell, gold-plated contact points are employed to help deliver an uncorrupted audio signal. High-quality PC-Triple C conductor cables are utilized for the tonearm cable so that the phono signal captured by the needle from the LP is transmitted with pure quality.