FREE SHIPPING On Orders Over $49*
Equipment > Turntables > Rega - RP8 Turntable (Apheta 2) **OPEN BOX**
Click to Enlarge

REGA - RP8 Turntable (Apheta 2) **OPEN BOX**


23Reward Points
Add to Cart
Availability: Out Of Stock

Custom-Made Skeletal Plinth, Triple-Layer Glass Platter, RB808 Tonearm, TT-PSU Power Supply Anchor Brilliant-Sounding Rega RP8 Turntable

Evolutionary and Revolutionary RP8 Turntable Winner of Golden Ear Award from The Absolute Sound: Named "One of the Best Designs of All Time" By Apple's Sir Jony Ive and Marc Newson

We know what you're thinking: Rega's RP8 turntable looks like it belongs as the centerpiece in a modern art museum. Yes, it does. But this evolutionary and revolutionary design—anchored by a custom-made skeletal plinth—also sounds brilliant. Equipped with a new tonearm-bearing assembly, triple-layer glass platter, and 24-volt low-noise motor controlled by a hand-tuned electronic power supply, this 'table extracts the finest details from LPs due to its superior rigidity, low-vibration motor, double bracing, and ultra-stable RB808 tonearm. Unbelievable performance, incredibly low price: Rega pushes the boundaries like never before with the RP8. You need to hear it for yourself.

"The sound of the RP8, which brings new levels of transparency, fine detail, soundstage definition, and drive to the always engaging Rega sound, along with a tonal richness weight, and dynamic thrust that I've never before experienced from any Rega design. The RP8 is one of the best mid-priced designs on the market - period."
The Absolute Sound, Golden Ear Award

Compact TT-PSU Power Supply for Extreme Balance
The compact TT-PSU uses a high stability, crystal locked, low-distortion sine-wave generator. This, along with an efficient drive amplifier fed from a stabilized DC power supply, generates a 24V AC balanced signal of less than 0.05% distortion, which is completely unaffected by any changes in the mains/line voltage and conditions. This then drives the improved Rega anti-vibration circuit built into the RP8 motor PCB.

Hand-Built and Newly Improved RB808 Tonearm
The RB808 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand-built by a team of highly skilled technicians. RB808 has improved bearings and a tightened spindle fit tolerance over previous models (each bearing is individually selected to find the perfect match for the chosen spindle). This is a proven method of increasing the amount of detail retrieved from the record surface. A brand-new, low-mass, precision-engineered vertical bearing assembly has been manufactured to further complement the inherent design philosophy of RP8. RB808 uses the latest Rega arm tube. Completely redesigned to redistribute mass, and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly using CAD design to blend the multiple varying tapers. Externally, Rega fitted a bespoke low-capacitance phono cable, which uses an advanced phono plug assembly. This has only two parts to minimize joints and incorporates a twist and clamp design. locking the plug to the terminal. The design increases connectivity and ensures the signal path is kept as clean as possible.

Obsessive Dual Bracing for Stability and Damping
A super-lightweight plinth combined with a double brace (mounted specifically where the increased rigidity is required) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. RP8 takes Rega's double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is phenolic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together, they decrease the natural frequency of each other by self-damping.

An Engineering Feat: The Super Flywheel Effect Triple-Layer Glass Platter
The RP8 three-piece laminated-glass platter is the result of a collaboration with a small, young British glass engineering company. As a general rule, the only part of a turntable that requires extra mass is the turntable platter in order to achieve constant rotational speed. However, a heavier platter creates more problems for the main bearing design, so again, an ideal compromise creates the best solution. This means keeping as much of the mass to the outside rim of the glass platter to create more flywheel effect but keeping the inside of the platter as light as possible without sacrificing stiffness. RP6 was the first Rega turntable to use a precision-engineered glass ring laminated to the outside using modern CNC techniques to ensure concentricity. RP8 takes it one step further by laminating three rings together to produce the RP8 super flywheel-effect glass platter.

Skeletal Plinth Features Polyolefin Foam Core
Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: Unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. Rega long ago pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fiber board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed. The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer that is happy pay a little more for higher sound quality. RP8 turntable utilizes a unique, new, stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega. The RP8 plinth is 7 times lighter than the weight of the original Planar 3 plinth.

De-Coupled Outer Frame and Dust Cover
A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover. Rega constructed an outer frame that minimizes contact between the inner and outer plinth. The only points of contact are three location devices on the feet, which centralize the inner and outer plinths. This makes setup extremely easy and allows the use of a dust cover. RP8 can be used without the outer frame if desired.

24V Low-Noise Motor
The motor is a high-specification, 24V twin phase synchronous unit that has the anti-vibration circuit hand-tuned to each motor and is controlled by Rega's unique and innovative TT-PSU. The motor drives the CNC machined pulley and sub platter/hub-bearing assembly via the belt drive.

Stay up-to-date on the latest and greatest in high-end audio


Check out the newest Music Direct catalogs

Learn More
Copyright © MusicDirect.com 2019. All Rights Reserved.