Back to Phono Cartridges

Brand: Audio Technica

Audio Technica - AT-VM95EBK/H Dual MM Cartridge/Headshell Combo Kit

Equipment Phono Cartridges
SKU: AATATVM95EBKH
In Stock
More Information
Questions? Give us a call: 312-433-0200
With more than 30 years of experience serving music lovers, we're here to answer your questions and provide personalized service.
60 Day Satisfaction Guarantee
Free Shipping on orders over $49
Copy and Share

Full Details

Ready to Affix to Your Tonearm: Audio-Technica AT-VM95EBK/H Combo Kit Features an AT-VM95SE Dual MM Cartridge Premounted on a Universal Half-Inch Mount Headshell 

Get everything you need to mount your new Audio-Technica AT-VM95SE dual moving-magnet phono cartridge on your tonearm with the AT-VM95EBK/H dual cartridge/headshell combo kit. Featuring the cartridge already pre-mounted on an AT-HS6BK headshell with a universal half-inch mount, this ready-to-go assembly offers a powerful 4.0mV output as well as excellent channel separation and low distortion for outstanding tonal quality. Its low-resonance housing includes threaded inserts that enable it to be mounted to another headshell with just two screws. Since no nuts are required, set up is quick and easy. And since all VM95 Series share the same body, the stylus can be replaced with any of the interchangeable AT-VMN95 replacement styli.

Read All

Highlights

−
  • VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
  • Compatible with any AT-VMN95 replacement stylus
  • Universal ½"-mount headshell for 4-pin turntable cartridges

Downloads

”User User Manual (PDF, 3.3 MB)

Specifications

  • Frequency Response: 20-22,000 Hz
  • Channel Separation: 20 (dB at 1 kHz)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47,000 ohms
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • DC Resistance: 485 ohms
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminum pipe
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: Half-inch
  • Cartridge Weight: 6.1g
  • Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
  • Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers
  • Model: AT-VM95E
  • Mounting : Half-inch mount
  • Recommended Load Capacitance: 100 to 200 pF
  • Replacement Stylus: AT-VMN95E
  • Stylus Size: 0.3 x 0.7 mil
  • Type: VM Stereo Dual Magnet
  • Weight: 6.1 g (0.22 oz)
  • Wire Used for Coil: T.P. Copper
Read All

Customer Feedback

!