Back to Power Amp

Brand: NAD Electronics

NAD M23 V2 Hybrid Digital Stereo Power Amplifier

Equipment Amplification Power Amp
SKU: ANADM23V2S
In Stock
More Information
Questions? Chat with us: 312-433-0200
With more than 30 years of experience serving music lovers, we're here to answer your questions and provide personalized service.
60 Day Satisfaction Guarantee
Free Shipping on orders over $49
Copy and Share
California residents: Click here for Proposition 65 warning

Full Details

Tame Any Speaker Load and Get Reference-Level Linearity with the NAS M23 V2 Hybrid Digital Stereo Power Amplifier: Features 200Wpc of Continuous Output, Vanishingly Low Distortion, and Balanced XLR Inputs

Get reference-grade linearity and wide, flat responsiveness with your speakers no matter the load, and enjoy profound dynamic range and detailed playback with the NAD M23 V2 Masters hybrid digital stereo power amplifier. Featuring second-generation Purify Eigentakt Class D amplifier modules and multi-layer circuit boards, M23 V2 continuously outputs a super-clean 200Wpc into eight ohms (380Wpc into four ohms). If that’s not enough juice, putting it in bridged mode gives you a whopping 700W mono (into eight ohms). Operating with nearly immeasurable noise, harmonic distortion, or intermodulation distortion, it epitomizes sonic transparency, rock-solid stability, and energy efficiency.

With M23 V2, the heat, weight, and inefficiency of traditional analog power stages are things of the past. Claiming an extremely low output impedance, M23 V2 offers iron-grip control of any loudspeaker load and consistent, smooth bass performance at practically any volume. Pinpoint imaging, broad soundstages, and effortless resolution of complicated passages count as practical hallmarks of this tremendous design.

Equipped with single-ended RCA and balanced XLR auto-sensing inputs, a three-position adjustable gain control, plus an intelligent 12V trigger input and output, M23 V2 seamlessly fits into any high-end separates system. Rigid panels and magnetic iso-point feet further add to the appeal of a unit that makes for a perfect match with the NAD M33 V2 or M66.

For more information on M23 V2 or any NAD Masters Series component, just reach out at 312-433-0200.

“[The] NAD Masters Series M23 Stereo power amplifier is a fine-sounding component. Do NAD’s own input stages and power supply contribute to the smooth, involving sound? They certainly don’t hurt. M23 also is a substantial piece of equipment, with full-sized casework and useful features like easy bridged operation and balanced as well as single-ended input connections.”
—Future Audiophile

 

Read All

Highlights

−
  • Second-generation HybridDigital Purifi Eigentakt™ amplifier technology
  • Continuous Power Output: 2x200W into 8 ohms; 2x380W into 4 ohms
  • Dynamic Power Output: 2x260W into 8 ohms; 2x520W into 4 ohms
  • Bridged Power Output: 700W mono continuous into 8 ohms
  • Virtually unmeasurable noise, harmonic distortion, intermodulation distortion
  • Wide, flat frequency response into any loudspeaker load
  • Balanced (XLR) and single-ended (RCA) auto-sensing inputs
  • Three-position adjustable gain control
  • 12V trigger input and 12V trigger output with 1s delay from 12V input

Downloads

”User User Manual (PDF, 1.2 MB)

Specifications

  • ANALOG AUDIO INPUT/SPEAKER OUT
  • Input impedance (R and C): Single-ended: 56 kohms + 200 pF Balanced: 56 kohms +200 pF
  • Frequency response (1W into 8 Ohms): ±0.06dB (20-20kHz)
  • Rated output power into 8 Ohms and 4 ohms(Stereo mode) 80 W (ref. 20 Hz-20 kHz at rated THD, both channels driven): >200W into 8 Ohm, >380W into 4 Ohm
  • Rated output power into 8 Ohms (Bridge mode, ref. 20 Hz-20 kHz at rated THD, both channels driven): >700W into 8 Ohm
  • THD (20 Hz – 20 kHz): <0.00069% (XLR), <0.0013% (RCA)
  • Signal-to-Noise Ratio: >101.7 dB (1W into 8 Ohm), >127 dB (200W into 8 Ohm)
  • Clipping power (Stereo mode, at 1 kHz 0.1 % THD): >210 W (0.1 % THD 1 kHz 8 ohms)
  • Clipping power (Bridge mode, at 1 kHz 0.1 % THD): > 770W
  • IHF dynamic power (Stereo mode, at 1 kHz): 8 ohms - 260 W, 4 ohms - 520 W
  • IHF dynamic power (Bridge mode, at 1 kHz): 1017W
  • Peak output current: >25 A (in 1 ohm, 1 ms)
  • Damping factor: >800 (ref. 8 ohms, 20 Hz to 6.5 kHz)
  • Frequency response: ±0.06 dB (stereo), ±0.054 dB (bridged) 20 Hz -20 kHz -3 dB at 60 kHz
  • Channel separation: High gain RCA >97dB, Low gain XLR: >115dB (1kHz), High gain RCA >75dB, Low gain XLR: >96dB (10kHz)
  • Stereo Mode input sensitivity (for 200 W in 8 ohms): Low gain: 4.5V (low gain), 2.5V (Mid gain), 1.4V (High gain)
  • Stereo Mode Gain: 19dB (low), 23.9dB (mid), 29.2 (high)
  • Bridge Mode Gain: 25.1dB (low), 30dB (mid), 35.2 (high)
  • Standby Power: <0.5W
  • DIMENSIONS AND WEIGHT
  • Dimensions (W x H x D)*: 435 x 133 x 381 mm (17 1/8 x 5 1/4 x 15 ")
  • Net Weight: 9.7 kgs / 21.4 lbs
  • Shipping Weight: 17.5 kgs / 38.5 lbs
  • Shipping Size W x H x D: 569 x 258 x 519 mm (22 13/32 x 20 7/16 x 10 5/32 ")
  • NOTE: * – Dimensions includes feet and extended rear panel terminals
Read All

Customer Feedback

!