Focal Omada N°4 Floor-Standing Speaker (Each)
Full Details
Full-Range Glory from a Flagship Design: French-Made Focal Omada N°4 Floor-Standing Loudspeaker Leaves Little to the Imagination and Fits into Tight Spaces
The flagship of the Focal Omada Series, the Omada N°4 floor-standing loudspeaker, leaves little to the imagination when playing back music. Anchored by two 8.25-inch woofers and a parallel 6.5-inch midrange, the three-way model delivers full-range performance marked by taut, powerful bass; faithful imaging; exceptional neutrality; immersive tonal expressiveness; and brilliant soundstaging. Designed for rooms of at least 269 square feet, Omada N°4 boasts a 92dB sensitivity and a relatively slender 44.375 x 12.0 x 16.875-inch (HWD) footprint that make it easy to drive and place.
The 69.45-pound Omada N°4 is further distinguished with exclusive technologies and in-house craftsmanship. Built in Focal's dedicated factory in France, its trio of Slatefiber drivers incorporate recycled, non-woven carbon fibers in sandwich formation between two thermoplastic polymer layers to respond with audiophile-grade balance, depth, and clarity. Surrounded by a urethane waveguide that provides excellent horizontal directivity, its M-shaped inverted-dome aluminum-magnesium TAM tweeter reproduces highs with noteworthy detail, transparency, accuracy, and softness.
Affixed to an aluminum base titled for optimal time alignment properties, Omada N°4 eliminates any concern over dynamic compression with Powerflow ports on the front and rear panels. Sturdy MDF construction that leads to controlled resonance, a leather-effect front panel, and detachable grilles help round out a speaker that functions as well in dedicated stereo setups as it does in home-theater configurations.
Want to know more about Omada N°4? Please reach out to an audio consultant at 312-433-0200.
Highlights
- Speaker driver with Slatefiber recycled carbon fibre cone, made in France by Focal
- Exclusive Tweeter TAM made in France by Focal
- Leather effect front panel
Downloads
User Manual (PDF, 4.0 MB)
Quick Start Guide (PDF, 2.3 MB)
Specifications
- Type: 3-way bass-reflex floorstanding loudspeaker
- Speaker drivers: 2 x 81/4" (21cm) Slatefiber woofers; 61/2" (16.5cm) Slatefiber Midrange; 1" (25mm) Al/Mg 'M'-shaped inverted dome TAM tweeter
- Sensitivity (2.83V/1m): 92dB
- Frequency response (+/-3dB): 40Hz - 30kHz
- Low frequency point (-6dB): 34Hz
- Nominal impedance: 8 Ω
- Minimum impedance: 2.6 Ω
- Recommended amplifier power: 40 - 350W
- Crossover frequency: 280Hz / 2,800Hz
- Dimensions (WxDxH): 12" x 16 7/8" x 44 3/8" (30.4x43x112.6cm)
- Net weight (with grille): 69.45lbs (31.5kg)
- Packaging dimensions (WxDxH): 18 1/8" x 23 5/8" x 49 1/4" (46x60x125cm)
- Net weight (with packaging): 83lbs (38.5kg)






