Monitor Audio - Silver 500 8G Floor-Standing Speakers (Pair)

Equipment Speakers
SKU: AMONISLV5008GBG
Select:
In Stock
More Information
Questions? Give us a call: 312-433-0200
With more than 30 years of experience serving music lovers, we're here to answer your questions and provide personalized service.

Full Details

Get Size, Presence, Extension, and Elegance: Series Flagship Monitor Audio Silver 500 8G Floor-Standing Speakers Play with Exceptional Control and Consistency, Invite You to Turn Up the Volume on Any Kind of Music for Full-Spectrum Performance

A commanding presence with equally commanding aural acumen, the Monitor Audio Silver 500 8G floor-standing loudspeaker performs like a Series flagship should and costs far less than most high-end lynchpins do. Offering exceptional transparency, across-the-board frequency response, involving punchiness, and tonal neutrality, this gorgeous model plays with phenomenal clarity, control, and consistency.

Built with Rigid Surface Technology III cone geometry that allows Silver 500 8G to remain both poised and commanding even at high volumes, each speaker boasts a one-inch C-CAM Gold Dome tweeter with UD Waveguide II, three-inch C-CAM RST III midrange driver, and two eight-inch C-CAM RST III bass drivers to help fill even large rooms with pristine, emotionally engaging sound. A powerful motor system – engineered for agility, accuracy, and impact – and progressive spider design for advanced linearity also count among the innovations responsible for this three-way unit's sonic grandeur.

With a sensitivity of 90dB, Silver 500 8G is easy to drive and pairs with a plethora of amplifiers. Silent Flow Port technology, through-bolt bracing, and an outrigger base for trustworthy stability add to the reasons why you should audition this speaker. So, too, do the elegant and clean aesthetics, which blend with almost any decor and proclaim the class with which Silver 500 8G handles all types of music.

Measuring 44.125 x 13.375 x 17.0 inches (HWD) and weighing a touch under 54 pounds each, Silver 500 8G comes with a five-year manufacturer warranty for additional peace of mind. Read more about the features below. And reach out to us at 312-433-0200 if you have any questions about Silver 500 8G or the Silver Series 8G.

"Give the Silver 500 8Gs dynamic, full-bore orchestral music, and they respond with an exciting, large-scale delivery."
—Hi-Fi News, Outstanding Product

C-CAM Gold Dome Tweeter
The new high-frequency driver has been comprehensively refined to deliver greater clarity, control and openness. A vented design and newly optimized internal enclosure geometry reduce distortion and improve airflow, while the addition of a shorting ring lowers impedance variation for cleaner, more consistent performance. The tweeter features an updated compression ring geometry and a new ring neodymium magnet for increased magnetic efficiency. Completing the system is the latest evolution of the UD Waveguide II, with refined geometry to improve directivity and deliver a smoother, more natural high-frequency response across a wider listening area.

C-CAM, RST III Mid Driver and Motor System
The RST III mid-range driver and motor system have been carefully re-engineered to deliver greater transparency and control through the critical vocal range. Updated RST III cone geometry increases rigidity and reduces colouration, and is supported by a re-profiled surround inspired by the proven Gold Series 6G design. A newly developed progressive spider with optimized geometry, together with an upgraded voice coil and improved venting, enhances linearity, airflow, and power handling. Housed within a dedicated enclosure, the mid driver delivers more focused, natural, and dynamically expressive mid-range performance.

C-CAM, RST III Bass Driver and Motor System
At the heart of the design is the all-new RST III bass/mid driver, engineered for greater control, clarity, and consistency. The updated RST III cone geometry increases stiffness while reducing unwanted resonances, and is supported by a re-profiled surround and a newly developed progressive spider with optimized geometry for improved linearity. An upgraded voice coil and enhanced venting improve thermal management and power handling, while selected models benefit from a larger magnet and optimized magnetic circuit, delivering tighter control, lower distortion, and a more precise, dynamic sound across the listening range.

Silent Flow Port Technology
Silver Series 8G port technology takes bass performance to the next level by significantly increasing diameter to reduce turbulence compared with previous designs. Its innovative flare geometry is inspired by the interlocking wing feathers of an owl, which allow silent flight, guiding airflow smoothly and quietly through the port. This biomimetic approach not only minimizes chuffing and turbulence for cleaner, deeper bass but is also a principle used in high-efficiency technologies such as wind turbine blades, demonstrating the wider potential of nature-inspired engineering.

Crossover
The crossover has been upgraded with higher-quality components throughout, ensuring more precise signal division and minimal coloration. Carefully selected capacitors, inductors, and resistors improve electrical performance and reduce losses, delivering a cleaner, more transparent signal path. The result is tighter integration between drivers, enhanced clarity across the frequency spectrum, and a more coherent, natural soundstage.

Engineered Wood
The European walnut veneer on Silver Series speakers is crafted from real, fully engineered wood. Carefully layered and shaped from sustainable timber, it achieves the rich grain, pattern, and color of exotic woods, delivering a luxurious, consistent finish without harvesting rare or endangered trees. The result is a harmonious blend of elegance and sustainability.

Outrigger Feet
Silver Series 8G outriggers take their cue from the flagship Platinum Series 3G, delivering a wider, more stable foundation for improved performance and presence. Engineered for both form and function, they feature a discreet top-adjust mechanism hidden beneath a spun metal disc, allowing precise leveling without disrupting the
clean aesthetic. Designed with versatility in mind, the spikes can be removed for hard floors, revealing integrated rubber feet that maintain stability while protecting surfaces.

Highlights

−
  • 2 x 8-inch C-CAM Bass Driver
  • 1 x 3-inch C-CAM Mid-Driver
  • 1 x 25mm C-CAM Gold Dome Tweeter
  • RST III Driver Geometry
  • Refined Crossover Design
  • Through-bolt Driver Bracing
  • Silent Flow Port Technology
  • New Outriggers
  • Finishes in Satin White, High Gloss Black & European Walnut

Downloads

ā€User User Manual (PDF, 2.174 MB)

Specifications

  • System Format: 3-Way
  • Frequency Response, In-Room (-6dB): 28 Hz – 35 kHz
  • Sensitivity (2.83 Vrms @ 1m, Free-Field)​​: 90 dB
  • Sensitivity (2.83 Vrms @ 1m, Installed): N/A
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance (20Hz to 20kHz): 3.6 Ohms @ 2 kHz
  • Maximum Peak SPL (AES75, Z-weighted): 119 dB
  • Continuous Power Handling (CTA 426-B): 250 W
  • Recommended Amplifier Power (RMS, Music Signal): 125 – 500 W into 4 Ohms, 60 – 250 W into 8 Ohms
  • Bass Alignment: Silent Flow Port Technology
  • Port Tuning Frequency: 33 Hz
  • Crossover Frequency: LF/MF: 640 Hz; MF/HF: 2.8 kHz
  • Drive Unit Complement: 2 x 8" C-CAM RST III bass driver, 1 x 3" C-CAM RST III mid-range driver, 1 x 25 mm C-CAM Gold Dome tweeter
  • Finishes: High Gloss Black, European Walnut, Satin White
  • External Dimensions with all accessories fitted (H x W x D): 1120 x 340 x 432 mm (441/8 x 133/8 x 17")
  • Weight (each): 24.3 kg (53 lb 9 oz)
  • Sold As: Pair
  • Warranty: 5 years

Customer Feedback