Vibrapods - Cone (Each)

Place Vibrapod Cones Under Audio and Video Equipment, Noticeably Reduce Vibration and Noise: Each Device Supports up to 25 Pounds

Deigned to be placed right under your audio and video equipment, the Vibrapod cone is the shape of effective, affordable vibration control. Used on their own or in conjunction with a set, Vibrapod cones are extremely effective at reducing vibration and noise. Each cone supports up to 25 pounds and can be used with the ball bearing side up, or with the ball bearing side down. Vibrapod cones enhance the performance of audio and video gear by protecting equipment from both room and rack vibrations. The ball bearing quickly siphons energy away from the chassis into the cone, which acts as a powerful energy-absorption device: Energy goes in and doesn't come out. Used alone, the cones make a definite audible difference, but they realize their full potential when used in combination with the amazingly affordable Vibrapods.

"Placed under CD players/transports, DACs and preamps, the small (1"x3" diameter), formed Vibrapods isolate and enhance performance. Five different models rated for loads of 228 lb; match the quantity to the component. I keep a box of them around so that no component goes without."
—Kalman Rubinson, Stereophile, 2026 Recommended Component 

Construction
Each Vibrapod Cone is made from the same material as Vibrapods, but is cone-shaped with a ball bearing inserted in the tip and a flanged base for proper seating on a Vibrapod. Using a set underneath your components will give you quieter backgrounds and more detail. Subtle elements that enhance the realism of the performance will be easier to hear, and your music will be richer and less fatiguing.

Please note: Vibrapod Isolators and Cones are made from vinyl and may blemish surfaces they touch. To ensure the safety of these surfaces, place a piece of felt, bar coasters, or playing cards between the surface and each Vibrapod Isolator or Cone.