Back to Phono Cartridges

Brand: Audio Technica

Audio Technica - AT-VM95EBK Dual MM Cartridge

Equipment Phono Cartridges
SKU: AATATVM95EBK
In Stock
More Information
Questions? Give us a call: 312-433-0200
With more than 30 years of experience serving music lovers, we're here to answer your questions and provide personalized service.
60 Day Satisfaction Guarantee
Free Shipping on orders over $49
Copy and Share

Full Details

Enjoy Entry-Level High-End Sound with No-Hassle Setup: Audio-Technica AT-VM95E Dual Moving-Magnet Phono Cartridge Provides 4.0mV Output, Easy Mounting

Get more bang for your buck with the Audio-Technica AT-VM95E dual moving-magnet phono cartridge. Featuring an aluminum cantilever and specially wound copper coils, it offers a powerful 4.0mV output as well as excellent channel separation and low distortion for outstanding tonal quality. Its low-resonance housing includes threaded inserts that enable it to be mounted to a headshell with just two screws. Since no nuts are required, set up is quick and easy. And since all VM95 Series share the same body, the stylus can be replaced with any of the interchangeable AT-VMN95 replacement styli.

Read All

Highlights

−
  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus

Downloads

”User User Manual (PDF, 4.6 MB)

Specifications

  • Frequency Response: 20-22,000 Hz
  • Channel Separation: 20 (dB at 1 kHz)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47,000 ohms
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • DC Resistance: 485 ohms
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminum pipe
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: Half-inch
  • Cartridge Weight: 6.1g
  • Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
  • Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers
  • Model: AT-VM95E
  • Mounting : Half-inch mount
  • Recommended Load Capacitance: 100 to 200 pF
  • Replacement Stylus: AT-VMN95E
  • Stylus Size: 0.3 x 0.7 mil
  • Type: VM Stereo Dual Magnet
  • Weight: 6.1 g (0.22 oz)
  • Wire Used for Coil: T.P. Copper
Read All

Customer Feedback

!