FREE SHIPPING On Orders Over $49*
Equipment > Phono Cartridges > Audio Technica - AT-VM95SH Dual MM Phono Cartridge
Click to Enlarge

AUDIO TECHNICA - AT-VM95SH Dual MM Phono Cartridge

Phono Cartridges

Audio Technica - AT-VM95SH Dual MM Phono Cartridge AATVM95SH

AUDIO TECHNICA - AT-VM95SH Dual MM Phono Cartridge

Phono Cartridges

Availability:In Stock (6)
Add to Cart
23Reward Points
Add to Cart
Availability: In Stock (6)
California customers: Please click here for
your Proposition 65 warning.

Painless Mounting Setup, Shibata Stylus, and Dual Magnets That Match the Channels in Vinyl LPs: Audio-Technica AT-VM85SH Dual MM Phono Cartridge Is High-Value Entry-Level High-End Analog

A 2.7 x 0.26-mil Shibata stylus, dual magnets that match the left/right channels in stereo LPs, painless mounting ability, and a sub-$200 cost make the Audio-Technica AT-VM95SH Dual MM phono cartridge an entry-level high-end steal. You'll enjoy generous amounts of texture, nuance, detail, and tonality from your vinyl LPs – not to mention low-noise playback. A durable, low-resonance polymer housing includes threaded inserts to enable AT-VM95SH to be mounted to the headshell with just two screws – no nuts required. And since all Audio-Technica VM95 Series models share the same body, the stylus can be replaced with any of the interchangeable AT-VMN95 replacement styli.

  • VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
  • Aluminum cantilever
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus
Read More Less
Frequency Response: 20-25,000 Hz
Channel Separation: 23 (dB at 1 kHz)
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude square shank
Recommended Load Impedance: 47,000 ohms
Output: 3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: 2.7 x 0.26 mil Shibata
Cantilever: Aluminum pipe
Mount: Half-inch
Replacement Stylus: AT-VMN95SH
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Load Capacitance: 100 to 200 pF
Coil Inductance: 550 mH (1 kHz)
Vertical Tracking Angle: 23°
Dimensions (HWD): 0.68" x 0.74" x 1.20"
Weight: 0.22 oz.
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver

Stay up-to-date on the latest and greatest in high-end audio


Check out the newest Music Direct catalogs

Learn More